EasyManuals Logo
Home>HP>Server>ProLiant series

HP ProLiant series User Manual

HP ProLiant series
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
Error messages 117
Event Type: Host bus error
CAUTION: Only authorized technicians trained by HP should attempt to remove the system board. If you
believe the system board requires replacement, contact HP Technical Support before proceeding.
Action: Replace the board on which the processor is installed.
Uncorrectable Memory Error (Slot X, Memory Module Y)...
...Uncorrectable Memory Error (System Memory)
Uncorrectable Memory Error (Memory Module Unknown)
Event Type: Uncorrectable error
Action: Replace the memory module. If the problem persists, replace the memory board.
HP BladeSystem infrastructure error codes
The server blade management modules and power management modules contain service ports that
enable service personnel to gather fault information.
To gather the fault information:
1. Connect to the service port. For more information, refer to the HP BladeSystem Maintenance and
Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info
).
2. Access the diagnostics. For more information, refer to the HP BladeSystem Maintenance and Service
Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info
).
Server blade management module error codes
Server blade error codes
Location LED codes
Server Blade - Slot 1 1-1 or 1-2
Server Blade - Slot 2 2-1 or 2-2
Server Blade - Slot 3 3-1 or 3-2
Server Blade - Slot 4 4-1 or 4-2
Server Blade - Slot 5 5-1 or 5-2
Server Blade - Slot 6 6-1 or 6-2
Server Blade - Slot 7 7-1 or 7-2
Server Blade - Slot 8 8-1 or 8-2
Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.
1. Reseat the server.
Refer to server documentation on the HP website (http://www.hp.com/products/servers/proliant-
bl/p-class/info).
Server blade management module board error codes
LED code: 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, or 9-12
Location: Server blade management module
Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant series and is the answer not in the manual?

HP ProLiant series Specifications

General IconGeneral
BrandHP
ModelProLiant series
CategoryServer
LanguageEnglish

Related product manuals