HP V1910 Switch Series User Manual

130
CAUTION:
The configuration on NMS must be consistent with that on the agent. Otherwise, you cannot perform
corresponding operations.
SNMPv3 adopts a security mechanism of authentication and privacy. You must configure username and
security level. According to the configured security level, you must configure the related authentication
mode, authentication password, privacy mode, privacy password, and so on.
You must also configure the aging time and retry times. After these configurations, you can configure the
device as needed through the NMS. For more information about NMS configuration, see the manual
provided for NMS.
Configuration verification
 After the above configuration, the NMS can establish an SNMP connection with the agent and
query and reconfigure values of objects in the agent MIB.
 If an idle interface on the agent is shut down or brought up, the NMS receives a trap information
sent by the agent.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English