HP V1910 Switch Series User Manual

435
Table 172 describes the configuration items of configuring line rate on a port.
Table 172 Configuration items of configuring line rate on a port
Item Descri
p
tion
Please select an interface type
Select the types of interfaces to be configured with line rate.
The interface types available for selection depend on your device
model.
Rate Limit Enable or disable line rate on the specified port.
Direction
Select a direction in which the line rate is to be applied.
 Inbound—Limits the rate of packets received on the specified port.
 Outbound—Limits the rate of packets sent by the specified port.
 Both—Limits the rate of packets received on and sent by the
specified port.
CIR Set the committed information rate (CIR), the average traffic rate.
Please select port(s)
Specify the ports to be configured with line rate
Click the ports to be configured with line rate in the port list. You can
select one or more ports.
Return to Line rate configuration task list.
Configuring priority mapping tables
Select QoS > Priority Mapping from the navigation tree to enter the page shown in Figure 407.
Figure 407 The page for configuring priority mapping tables
Table 170 describes the configuration items of configuring priority mapping tables.
Table 173 Configuration items of configuring priority mapping tables
Item Descri
p
tion
Mapping Type
Select the priority mapping table to be configured, which can be CoS
to DSCP, CoS to Queue, DSCP to CoS, DSCP to DSCP, or DSCP to
Queue. For example, select DSCP to DSCP mapping type to enter the
page shown in Table 174.
Input Priority Value
Set the output priority value for an input priority value.
Output Priority Value
Restore
Click Restore to display the default settings of the current priority
mapping table on the page.
To restore the priority mapping table to the default, click Apply.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English