HP V1910 Switch Series User Manual

277
Configuring and displaying clients' IP-to-MAC
bindings
Select Network > DHCP from the navigation tree to enter the default DHCP Relay page shown in Figure
240. In the User Information field, click the User Information button to view static and dynamic bindings,
as shown in Figure 243. Click Add to enter the page shown in Figure 244.
Figure 243 Display clients' IP-to-MAC bindings
Figure 244 Create a static IP-to-MAC binding
Table 109 Static IP-to-MAC binding configuration items
Item Descri
p
tion
IP Address Type the IP address of a DHCP client.
MAC Address Type the MAC address of the DHCP client.
Interface Name
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent;
otherwise, address entry conflicts may occur.
Return to DHCP relay agent configuration task list.
DHCP relay agent configuration example
Network requirements
As shown in Figure 245, VLAN-interface 1 on the DHCP relay agent (Switch A) connects to the network
where DHCP clients reside. The IP address of VLAN-interface 1 is 10.10.1.1/24 and the IP address of

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English