HP V1910 Switch Series User Manual

345
Table 123 ISP domain configuration items
Item Descri
p
tion
Domain Name
Type the ISP domain name, which is for identifying the domain.
You can type a new domain name to create a domain, or specify an existing domain
to change its status (whether it is the default domain).
Default Domain
Specify whether to use the ISP domain as the default domain.
 Enable: Uses the domain as the default domain.
 Disable: Uses the domain as a non-default domain.
There can only be one default domain at a time. If you specify a second domain as
the default domain, the original default domain becomes a non-default domain.
Return to Configuration task list.
Configuring authentication methods for the ISP domain
Select Authentication > AAA from the navigation tree and then select the Authentication tab to enter the
authentication method configuration page, as shown in Figure 318.
Figure 318 Authentication method configuration page
Table 124 Authentication method configuration items
Item Descri
p
tion
Select an ISP
domain
Select the ISP domain for which you want to specify authentication methods.
Default AuthN
Configure the default authentication method and secondary authentication method for all
types of users.
Options include:
 Local—Performs local authentication.
 None—All users are trusted and no authentication is performed. Generally, this mode
is not recommended.
 RADIUS—Performs RADIUS authentication. You must specify the RADIUS scheme to be
used.
 Not Set—Restore the default, that is, local authentication.
Name
Secondary Method

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English