tion
Customer VLAN
Define a match criterion to match customer VLAN IDs.
If multiple such match criteria are configured for a class, the new configuration
does not overwrite the previous one.
You can configure multiple VLAN IDs each time. If the same VLAN ID is
specified multiple times, the system considers them as one. The relationship
between different VLAN IDs is logical OR. You can specify VLAN IDs in two
ways:
ï‚· Enter a range of VLAN IDs, such as 10-500. The number of VLAN IDs in the
range is not limited.
ï‚· Specify a combination of individual VLAN IDs and VLAN ID ranges, such as
3, 5-7, 10. You can specify up to eight VLAN IDs in this way.
ACL IPv4
Define an IPv4 ACL-based match criterion.
The ACLs available for selection are existing IPv4 ACLs.
Return to QoS policy configuration task list.
Creating a traffic behavior
Select QoS > Behavior from the navigation tree and click the Create tab to enter the page for creating a
traffic behavior, as shown in Figure 399.
Figure 399 The page for creating a traffic behavior
Table 165 describes the configuration items of creating a behavior.
Table 165 Configuration items of creating a behavior
Item Descri
To Next Page
Loading...
Need help?
General