HP V1910 Switch Series User Manual

65
Port management configuration
You can use the port management feature to set and view the operation parameters of a Layer 2 Ethernet
port, including but not limited to its state, rate, duplex mode, link type, PVID, MDI mode, flow control
settings, MAC learning limit, and storm suppression ratios.
Configuring a port
Setting operation parameters for a port
Select Device > Port Management from the navigation tree, and then select the Setup tab on the page
that appears to enter the page as shown in Figure 51.
Figure 51 The Setup tab

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English