206
Displaying information of an aggregate interface
Select Network > Link Aggregation from the navigation tree. The Summary tab is displayed by default,
as shown in Figure 177.
Figure 177 Display information of an aggregate interface
Table 84 Fields on the Summary tab
Field Descri
Aggregation interface
Type and ID of the aggregate interface.
Bridge-Aggregation indicates a Layer 2 aggregate interface.
Link Type Type of the aggregate interface, which can be static or dynamic.
Partner ID ID of the remote device, including its LACP priority and MAC address.
Selected Ports
Number of Selected ports in each link aggregation group. Only Selected ports
can transmit and receive user data.
Standby Ports
Number of Unselected ports in each link aggregation group. Unselected ports
cannot transmit or receive user data.
Return to Static aggregation group configuration task list.
Return to Dynamic aggregation group configuration task list.
Setting LACP priority
Select Network > LACP from the navigation tree, and click the Setup tab to enter the page shown in
Figure 178.
To Next Page
Loading...
Need help?
General