HP V1910 Switch Series User Manual

140
Modifying ports
Select Network > VLAN from the navigation tree and click the Modify Port tab to enter the page shown
in Figure 126.
Figure 126 The Modify Port tab
Table 54 Configuration items of modifying ports
Item Descri
p
tion
Select Ports
Select the ports to be modified.
Click one or more ports you want to modify on the chassis front panel.
If aggregate interfaces are configured on the device, the page displays a list of
aggregate interfaces below the chassis front panel, and you can select
aggregate interfaces from this list.
Select
membership
type
Untagged
Set the member types of the selected ports to be modified in the specified VLANs.
The options include:
 Untagged—Assign the selected ports to the specified VLANs as untagged
members. After that, the ports send the traffic of those VLANs after removing
the VLAN tags.
 Tagged—Assign the selected ports to the specified VLANs as tagged
members. After that, the ports send the traffic of those VLANs without removing
the VLAN tags.
 Not A Member—Remove the selected ports from the specified VLANs.
Tagged
Not A
Member
VLAN IDs
Set the IDs of the VLANs that the selected ports are to be assigned to or removed
from. This item is available when the Untagged, Tagged, or Not A Member option
is selected in the Select membership type area.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English