HP V1910 Switch Series User Manual

382
Item Descri
p
tion
Requesting URL
Type the URL of the RA.
The entity will submit the certificate request to the server at this URL through the SCEP
protocol. The SCEP protocol is intended for communication between an entity and an
authentication authority.
In offline mode, this item is optional; while in other modes, this item is required.
IMPORTANT:
This item does not support domain name resolution.
LDAP IP
Type the IP address, port number and version of the LDAP server.
In a PKI system, the storage of certificates and CRLs is a crucial problem, which is usually
addressed by deploying an LDAP server.
Port
Version
Request Mode Select the online certificate request mode, which can be auto or manual.
Password Encrypt
Select this check box to display the password in cipher text.
This check box is available only when the certificate request mode is set to Auto.
Password
Type the password for certificate revocation.
This item is available only when the certificate request mode is set to Auto.
Hash
Specify the hash algorithm and fingerprint for verification of the CA root certificate.
Upon receiving the root certificate of the CA, an entity needs to verify the fingerprint of
the root certificate, namely, the hash value of the root certificate content. This hash value
is unique to every certificate. If the fingerprint of the root certificate does not match the
one configured for the PKI domain, the entity will reject the root certificate.
IMPORTANT:
The fingerprint of the CA root certificate is required when the certificate request mode is
Auto, and can be omitted when the certificate request mode is Manual. When it is omitted,
no CA root certificate verification occurs automatically and you need to verify the CA server
by yourself.
Fingerprint
Polling Count
Set the polling interval and attempt limit for querying the certificate request status.
After an entity makes a certificate request, the CA may need a long period of time if it
verifies the certificate request in manual mode. During this period, the applicant needs to
query the status of the request periodically to get the certificate as soon as possible after
the certificate is signed.
Polling Interval
Enable CRL
Checking
Select this box to specify that CRL checking is required during certificate verification.
CRL Update Period
Type the CRL update period, that is, the interval at which the PKI entity downloads the
latest CRLs.
This item is available when the Enable CRL Checking check box is selected.
By default, the CRL update period depends on the next update field in the CRL file.
CRL URL
Type the URL of the CRL distribution point.
This item is available when the Enable CRL Checking check box is selected.
Note that when the URL of the CRL distribution point is not set, you should acquire the CA
certificate and a local certificate, and then acquire a CRL through SCEP.
IMPORTANT:
This item does not support domain name resolution.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English