HP V1910 Switch Series User Manual

396
Figure 375 Configure isolated ports for an isolation group
 Select Isolate port for the port type.
 Select GigabitEthernet 1/0/2, GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4 on the chassis
front panel.
 Click Apply. A configuration progress dialog box appears.
 After the configuration process is complete, click Close in the dialog box.
# View information about the isolation group.
Click Summary. The page shown in Figure 376 appears.
Figure 376 Information about port isolation group 1
As shown on the page, port isolation group 1 contains these isolated ports: GigabitEthernet 1/0/2,
GigabitEthernet 1/0/3, and GigabitEthernet 1/0/4.

HP V1910 Switch Series Specifications

General

Brand	HP
Model	V1910 Switch Series
Category	Switch
Language	English