Hypertherm HyPerformance Plasma HPR800XD User Manual

InstallatIon
3-12 HPR800XD Auto Gas – 806500
Placement of the secondary power supply
• Place the power supply in an area that is free of excessive moisture, has proper ventilation, and is relatively clean.
The components of the plasma system are not intended to be exposed to rain or snow. Allow 1 m (3 ft) of space
on all sides of the power supply for ventilation and service.
• Coolingairisdrawninthroughthefrontpanelandisexhaustedthroughtherearoftheunitbyacoolingfan.
Do not place any filter device over the air intake locations, which reduces cooling efficiency and VOIDS THE
WARRANTY.
• Donotplacethepowersupplyonaninclinegreaterthan10°,topreventitfromtoppling.
B
DANGER
ELECTRIC SHOCK CAN KILL
Remove all electrical connections to the power supply before moving or positioning. Transporting the
unit can cause personal injury and equipment damage.

Hypertherm HyPerformance Plasma HPR800XD Specifications

General

Brand	Hypertherm
Model	HyPerformance Plasma HPR800XD
Category	Cutter
Language	English