Hypertherm SYNC Powermax 85 User Manual

Powermax65/85/105 SYNC Operator Manual 810470 111
Gouge with the Hand Torch
Select the correct gouging cartridge
Hypertherm offers the following gouging cartridges, which you can use with both the 15° and the
75° SmartSYNC hand torches. The 15° hand torch is designed to point heat away from the operator
during heavy gouging.
Cartridge Type Purpose
Maximum Control
gouging
(green)
Use these cartridges for more precise metal
removal, shallow gouge profiles, and light
metal washing.
A slower gouging speed is recommended,
but the diffuse plasma arc gives better
visibility than Maximum Removal cartridges.
If you are learning to gouge, start with
Maximum Control cartridges.
Maximum Removal
gouging
(green)
Use these cartridges for aggressive metal
removal, deep gouge profiles, and extreme
metal washing.
A faster gouging speed is recommended to
control the concentrated plasma arc.
HyAccess gouging
(black)
Use these cartridges to increase the range
of the torch to gouge in hard-to-reach areas
or confined spaces.

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English