Hypertherm SYNC Powermax 85 User Manual

Powermax65/85/105 SYNC Operator Manual 810470 19
Where to Find Information
This operator manual includes the following information for the Powermax65/85/105 SYNC plasma
power supplies and SmartSYNC™ hand torches:
 Specifications, ratings, and installation and setup information
 Operating instructions for the plasma power supply and torch
 Instructions for cutting, piercing, and gouging
 Maintenance and troubleshooting information
For related information, refer to the following documents:
 Safety and Compliance Manual (80669C)
 Powermax65/85/105 SYNC Cut Charts Guide (810500MU)
 Powermax65/85/105 SYNC Parts Guide (810490)
 Powermax65/85/105 SYNC Mechanized Cutting Guide (810480)
You can find these documents on the USB memory stick that came with your plasma power supply.
Technical documentation is also available at www.hypertherm.com/docs.

Technical documentation is current as of the date of its release.
Subsequent revisions are possible. Refer to www.hypertherm.com/docs
for the most recent revisions of released documents.

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English