Hypertherm SYNC Powermax 85 User Manual

Operate the Plasma System
3
80 810470 Operator Manual Powermax65/85/105 SYNC
XT – This field shows the cumulative arc transfer time that the Hypertherm cartridge has had in its
life, in hours (HH), minutes (MM), and seconds (SS): HH:MM:SS.
You can see this same data for the life of the plasma power supply. Refer to Power Supply Data
screen on page 156.
Show cartridge data on the status screen
You can show the cartridge data for pilot arc starts (STA) and arc transfer time (XT) on the status
screen. When you set the STA/XT field to on, these values stay on the status screen until you set
the STA/XT field to off.
1. Push and hold for 2 seconds to go to the main menu screen.
2. Turn the adjustment knob to go to . Push to select it.
3. Turn the adjustment knob to go to , and push to select it. The LCD Display screen
(LCD DISPLAY) shows.
4. Turn the adjustment knob to go to the STA/XT field, and push to select it.
5. Turn the adjustment knob to set the STA/XT field
to on: .
6. Push to apply the setting.

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English