Hypertherm SYNC Powermax 85 User Manual

Install and Set Up the Plasma Power Supply
2
30 810470 Operator Manual Powermax65/85/105 SYNC
Find system specifications on the data plate
The data plate on the rear of the plasma power supply contains 2 sets of ratings:
 The HYP ratings are Hypertherm plasma power supply ratings. They show the capability of
the system related to Hypertherm’s internal testing.
 The IEC ratings are the minimum ratings that the system must get to meet the requirements
of IEC standard 60974-1.
CSA, CE, and CCC data plates differ slightly.
Sample CSA
data plate
Sample
CE/CCC data
plate
1
2
4
3
1
2
4
3
1 Serial number, bar code, and date made
2 Plasma cutting ratings
3 Plasma gouging ratings
4 Plasma power supply ratings
HYP = Hypertherm internal rating
IEC = International Electrotechnical Commission
rating
I
1
= Input current (A)
I
2
= Conventional welding current (A)
PF = Power factor
U0 = Rated no load voltage (V)
U1 = Input voltage (V)
U2 = Conventional welding voltage (V)
X = Duty cycle (%)

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English