Hypertherm SYNC Powermax 85 User Manual

Troubleshoot Common Problems
6
Powermax65/85/105 SYNC Operator Manual 810470 149
Adjust system settings on the Feature Configuration screen
Go to the Feature Configuration screen (FEATURE CONFIG) to change system settings.
Changing these fields from their default settings is recommended only for experienced
operators.
Changing one of these fields from the default setting causes the non-default
configuration icon (at right) to show on the status screen.
By default, this screen is locked. To change any of the settings on this screen, you must
first unlock the screen using the icon.
1. Push and hold for 2 seconds to go to the main menu screen.
2. Select on the main menu screen.
3. Select to go to the FEATURE CONFIG screen.
4. Turn the adjustment knob to go to the field.
5. Push to select the field.
6. Turn the adjustment knob to set the field to the unlock position: .
7. Push to apply the unlock setting.
8. Turn the adjustment knob to go to another field on the screen.
9. Push to select the field.
10. Turn the adjustment knob to change the value for the selected field.
11 . Push to keep the new value.

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English