Hypertherm SYNC Powermax 85 User Manual

Operate the Plasma System
3
64 810470 Operator Manual Powermax65/85/105 SYNC
Step 1 – Connect the torch lead
 Always set the power
switch on the plasma
power supply to OFF (O)
before you connect or
disconnect a torch.
 To connect a hand torch
or machine torch, push
the connector into the
receptacle on the front of
the plasma power supply.
The connector makes a
click when it is fully
engaged.
 To disconnect the torch,
push the red button on
the connector and pull
the connector out of the receptacle.
Red button

Hypertherm SYNC Powermax 85 Specifications

General

Brand	Hypertherm
Model	SYNC Powermax 85
Category	Welding System
Language	English