Install and Set Up the Plasma Power Supply
Powermax65/85/105 SYNC Operator Manual 810470 33
IEC symbols
The following symbols can appear on the data plate, control labels, switches, light-emitting diodes
(LEDs), and liquid-crystal display (LCD) screen, if applicable.
Direct current (DC)
Alternating current (AC)
Plasma torch cutting
Plate metal cutting
Expanded metal cutting
Gouging
AC input power
connection
The terminal for the
external protective (earth)
conductor
Power is ON
Power is OFF
An inverter-based power
source, either 1-phase or
3-phase
Volt/amperage curve,
“drooping” characteristic
To Next Page
Loading...
Need help?
General
