provides Ethernet connectivity at a data rate of 1 Gbps and are connected with unshielded twisted-pair
(UTP) Ethernet cables. The link aggregation and failover features of the adapter are ideal for critical
network applications that require redundancy and high availability. Figure 34shows the FC 5745 adapter.
Note: The SFP+ twinaxialial copper cables have connectors that are not the same as the AS/400 5250
connector, the CX4 connector, or the 10 GBASE-T connector.
For details about slot priorities and placement rules, see the PCI adapter placement topic collection for
your system.
Specifications
Item Description
Adapter FRU number
FC 5279: 74Y1986 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe2 x8
Slot requirement
For the slot priorities, see the PCI adapter placement topic collection for your system.
Cables
See “Cables” on page 101 for details
Voltage
3.3 V
Form factor
Short
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your
system.
Figure 34. PCIe2 LP 2x10GbE SFP+ Copper 2x1GbE UTP Adapter
100 Power Systems: Managing PCI adapters for the IBM Power 710 Express or the IBM Power 730 Express
To Next Page
Loading...
Need help?
General