14
VOICE MEMORY FUNCTION
14-10
Previous view
The transceiver can record the transmit and receive au-
dio into the same fi le.
Push q
(C) to enter the Set mode.
Touch the “File Split” item of the “Voice Memo” Set w
mode.
( Voice Memo > QSO Recorder > Recorder Set >
File Split)
• If the specifi ed item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch “OFF.” e
• OFF : The transceiver records the transmit and receive
audio into the same fi le.
• ON : The transceiver records the transmit and receive
audio into each fi le.
The transceiver makes separate new fi les for
transmit and receive audio. (Default setting)
• When you set the RX REC Condition item to
“Squelch Auto,” the transceiver records audio to
the new fi le when the squelch either opens or
closes.
( Voice Memo > QSO Recorder > Recorder set >
RX REC Condition)
Push r
(C) to exit the Set mode.
NOTE: Even if you set the “File Split” item to OFF,
when the recording fi le’s content becomes 2 GB, the
transceiver continues to record, but to a new fi le.
About the VOICE PLAYER screen when recording
into the same fi le
The VOICE PLAYER screen shows information that
is recorded fi rst.
When the receive audio was recorded fi rst, the trans-
mit audio information is not displayed on the screen.
Record the transmit and receive audio into the same fi le
Touch
“File Split.”
Touch
“Voice Memo.”
Touch
“QSO Recorder.”
Touch
“OFF.”
Touch
“Recorder Set.”
To Next Page
Loading...
Need help?
General
