6
FUNCTIONS FOR TRANSMIT
6-16
Previous view
SWR Graph Set mode D
Push q
(C) one or more times to select the
“M-3” screen (M-3 menu).
Touch [SWR]( w D) to display the “SWR” (SWR Graph)
screen.
Touch [SET]( e D) to enter the “SWR GRAPH SET”
screen.
Touch the desired item to select. r
• See below for details of the set items and options.
Touch the t desired option to change the setting.
• If desired, touch the item for 1 second to open the De-
fault set window, then select the “Default” to reset to the
default setting.
Touch [ y ](D) or push
(C) to return to the
“SWR” (SWR Graph) screen.
Push u
(C)
to return to the “M-3” screen
(Menu 3)
.
Measuring SWR (Continued)
Number of Graph Bar (Default: 5)
Select the number of the graph bar for the displayed
SWR Graph.
• The selectable number are 3, 5, 7, 9, 11 and 13.
Measuring Step (Default: 10k)
Select the SWR measuring step for the center frequen-
cy.
• The selectable steps are 10k, 50k, 100k and 500
kHz.
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Touch [SET]
Touch the item
Touch [SWR]
Push
To Next Page
Loading...
Need help?
General
