Icom IC-7100 User Manual

17
SET MODE
17-27
Previous view
Display Contrast (Default: 25%)
Display > LCD Contrast (LCD Contrast)
Set the display contrast level to between 0% and
100%.
LCD Backlight (Default: 50%)
Display > LCD Backlight (LCD Backlight)
Set the LCD backlight brightness to between 0% and
100%.
Key Backlight (Default: 50%)
Display > Key Backlight (Key Backlight)
Set the key backlight brightness to between 0% and
100%.
Meter Peak Hold (Default: ON)
Display > Meter Peak Hold (Meter Peak Hold)
Turn the Meter Peak Hold function ON or OFF.
This function displays the peak level of a received sig-
nal strength or the output power for approximately 0.5
seconds.
BW Popup (PBT) (Default: ON)
Display > BW Popup (PBT) (BW Popup (PBT))
Select whether or not to display the PBT shift value
while rotating the TWIN-PBT control.
• OFF: Turns the function OFF.
• ON: Displays the PBT shift value.
BW Popup (FIL) (Default: ON)
Display > BW Popup (FIL) (BW Popup (FIL))
Select whether or not to display the IF fi lter width and
shift value when the IF fi lter is switched by touching the
fi lter icon.
• OFF: Turns the function OFF.
• ON: Displays the IF fi lter width and shift value.
RX Call Sign Display (Default: Auto)
Display > RX Call Sign Display (RX Call Sign Display)
Select whether or not to display the call sign of the call-
er station when a call is received.
• OFF: Does not display the caller station’s
call sign.
• Auto: The caller station’s call sign auto-
matically scrolls once, and then dis-
appears.
• Auto (RX Hold): The caller station’s call sign automat-
ically scrolls once, and then remains
on the display until the signal disap-
pears.
NOTE:
When “Auto” or “Auto (RX Hold)” is selected, and if
the call sign and name of the caller station is pro-
grammed in your memory, the programmed name is
displayed after showing the call sign.
RX Message Display (Default: Auto)
Display > RX Message Display (RX Message Display)
Select whether or not to display and scroll a received
message.
• OFF: Does not display the message.
To check the message, touch [CD] on the “D-1”
screen (Menu D1) to display the call record.
• Auto: Automatically displays and scrolls the mes-
sage.
The message is automatically displayed every
30 seconds until their signal disappears.
NOTE:
When “Auto” or “Auto (RX Hold)” is selected in RX
Call Sign Display, the message is displayed after dis-
playing the caller station’s call sign.
Reply Position Display (Default: ON)
Display > Reply Position Display (Reply Position Dis-
play)
Select whether or not to display the caller’s position
data when the data is included in the Auto Replay sig-
nal.
• OFF: Does not display the caller’s position data.
• ON: Automatically displays the caller’s position data.
Display Set mode

Icom IC-7100 Specifications

General

Brand	Icom
Model	IC-7100
Category	Transceiver
Language	English