EasyManuals Logo
Home>Icom>Transceiver>IC-7100

Icom IC-7100 User Manual

Icom IC-7100
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
4
RECEIVE AND TRANSMIT
4-25
Previous view
A repeater receives transmitted signals and retransmits
them on a different frequency. When using a repeater,
the transmit frequency is shifted from the receive fre-
quency by a frequency offset.
A repeater can be accessed using the duplex function-
by setting the frequency shift to the same value as the
repeater’s frequency offset.
See page 94 for details on accessing a D-STAR
®
repeater.
Touch the Memory channel indication once or twice q
to select the VFO mode.
Select the desired frequency band. (p. 35) w
On the Mode selection screen, touch “FM” to select e
the FM mode.
Rotate the Dial to set the receive frequency (Repeat- r
er output frequency).
When the Auto Repeater function is turned ON
(available in only the U.S.A. and Korea versions),
steps t and y are not necessary. (p. 67)
t
P
ush
MENU
(C) one or more times to display the
“M-2” screen (M-2 menu), then touch [DUP](D) one
or more times to set the offset direction.
• “DUP–” or “DUP+” appears.
The transmit frequency (repeater input frequency) ap-
pears above the function menu.
The frequency offset (amount of shift) can be set in
the
“DUP Offset” item
of the Function Set. (p. 163)
Touch [TONE]( y D) to turn ON the repeater tone.
“TONE” appears.
The tone frequency can be set in
the
“TONE” screen.
88.5 Hz is set by default. (p. 4-25)
Communicate in the normal way. u
Subaudible tones are superimposed on your transmit sig-
nal.
Repeater operation
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Frequency Offset setting
The frequency offset (amount of shift) can be set in
the
“DUP Offset” item
of the Function Set. (p. 163)
SET
(C) > Function > SPLIT/DUP > DUP Offset
Frequency offset
5.0000 MHz
If the Repeater tone frequency or the frequency off-
set is changed, the tone frequency or frequency off-
set for auto repeater function is also changed.
Repeater tone icon
Transmit frequency
(Repeater input frequency)
Duplex icon

Table of Contents

Other manuals for Icom IC-7100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-7100 and is the answer not in the manual?

Icom IC-7100 Specifications

General IconGeneral
BrandIcom
ModelIC-7100
CategoryTransceiver
LanguageEnglish

Related product manuals