Icom IC-7100 User Manual

7
D-STAR INTRODUCTION
7-2
Previous view
IMPORTANT!
Before starting D-STAR, the following steps are needed.
STEP 1
Entering your call sign (MY) into the transceiver.
STEP 2
Registering your call sign
(MY) to a gateway repeater.
You have completed the steps!!
“MY” (Your own call sign) programming
You can store up to 6 “MY” call signs.
Example: Enter “JA3YUA” as your own call sign into the
MY call sign memory [MY1].
Display the My Call Sign Edit screen1.
Push q
SET
(C) to enter the Set mode.
Touch the “MY Call Sign” item of the “My Station” Set w
mode.
(My Station > MY Call Sign)
• If the specifi ed item is not displayed, touch [∫] or [√](D)
one or more times to select the page.
Touch the desired call sign memory for 1 second. e
(Example: 1:)
Touch the “Edit” item. r
• “MY CALL SIGN (MYM)” screen appears.
The memory number, selected in the step e, is dis-
played.
(Example: MY1)
The L, R, C or D in the instructions indicate the part of
the controller.
L: Left side, R: Right side, C: Center bottom
D: Display (Touch panel)
Continued on the next page ☞
Touch [√]
Touch
“My Station”
Touch
“MY Call Sign”
Touch the call
sign memory
for 1 second
(Example: 1:)
Touch
“Edit”

Icom IC-7100 Specifications

General

Brand	Icom
Model	IC-7100
Category	Transceiver
Language	English