17
SET MODE
17-3
Previous view
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
Call sign (Section 9) ➥
RX Record (Section 9) ➥
MY Station (Section 7) ➥
SD Card (Section 13) ➥
GPS (Section 10) ➥
Voice Memo In this item, set the TX/RX voice recording options.
QSO Recorder
<<REC Start>>* Starts recording the received audio.
Play Files*
Selects to playback or delete the recorded audio.
Recorder Set
REC Mode TX&RX or RX Only Selects to record the TX audio or not.
RX REC Condition Always or Squelch Auto Selects whether or not the squelch status affects
the RX voice audio recording.
File Split OFF or ON Selects whether or not to automatically create
a new fi le after each transmission, reception, or
each time the squelch opens or closes.
PTT Auto REC OFF or ON Turns the PTT Automatic Recording function ON
or OFF.
Player Set
Skip Time 3sec, 5sec, 10sec or 30sec Sets the Skip time to rewind or forward the re-
corded audio when you push the fast-rewind or
fast-forward key during playback.
DV Auto Reply* Records a voice audio to use for the Auto Reply
function in the DV mode.
* Be sure to insert the SD card into the transceiver before selecting these items.
DV Set In this item, set infrequently changed values or functions in the DV mode.
Standby Beep OFF, ON or ON (to me: High Tone) Selects whether or not to sound a beep after a
received signal disappears.
Auto Reply OFF, ON or Voice Selects whether or not to automatically reply to a
call addressed to your own call sign.
DV Data TX PTT or Auto Selects to manually or automatically transmit low
speed data.
Digital Monitor Auto, Digital or Analog Selects the DV mode RX monitoring when [XFC]
is held down.
Digital Repeater Set OFF or ON Turns the digital repeater setting function ON or
OFF. This function is usable in any DV mode ex-
cept the DR mode.
RX Call Sign Write OFF or Auto Turns the RX call sign automatic write function
ON or OFF. This function is usable in any DV
mode except the DR mode.
RX Repeater Write OFF or Auto Turns the repeater call sign automatic write func-
tion ON or OFF. This function is usable in any DV
mode except the DR mode.
DV Auto Detect OFF or ON Turns the DV mode automatic detect function ON
or OFF.
RX Record (RPT) ALL or Latest Only Selects whether to record all calls or only the lat-
est call, when the received signal includes a sta-
tus message (“UR?” or “RPT?”) that is sent back
from the access repeater.
BK OFF or ON Turns the BK (Break-in) function ON or OFF.
The BK function allows you to break into a con-
versation between two stations with call sign
squelch enabled.
EMR OFF or ON Turns the EMR (Enhanced Monitor Request)
communication mode ON or OFF.
After turning OFF the transceiver, the EMR mode
will be cancelled.
EMR AF Level 0%~50%~100% Sets the audio output level when an EMR mode
signal is received.
Set mode items and Default settings
To Next Page
Loading...
Need help?
General
