14
VOICE MEMORY FUNCTION
14-16
Previous view
You can also playback the voice memory data on a
PC.
However, the recorded information (frequency, date,
and so on) are not displayed.
• Mircosoft
®
Windows
®
7 is used for the description.
Example: Connect a memory card reader (3rd party
product) to the PC, and insert the SD card
into the reader. Then playing back the voice
memory data in the card.
• When you copy the voice memory data from the
SD card to the PC’s hard disk drive, you also
operate the same as following steps for playing
back data.
Connect the memory card reader to the PC, and q
then insert the SD card into the reader.
• If your PC has an SD card drive, insert the card into the
drive.
When the SD card is inserted in the SD card drive of w
the PC or the SD card reader, the screen appears,
as shown to the right.
• The [IC-7100] folder appears.
Double-click the [IC-7100] folder. e
Double-click
Double-click
NOTE:
• The operations while playing back may differ, de-
pending on the software. Therefore, refer to the
software’s instruction manual for details.
• When the fi le does not playback, even if you dou-
ble-click the fi le, download appropriate software
like Windows Media
®
Player.
Double-click the [Voice] folder. r
Double-click the folder in which the fi le you want to t
playback is stored.
(Example: 20130301 folder)
To playback the fi le, double-click it. y
(Example: 20130301_184451.wav)
Click
Double-click
Double-click
Playing back the voice memory data on a PC
SD card
Transceiver
To the Card
reader
PC
To Next Page
Loading...
Need help?
General
