N Scan types
Scanning searches for signals automatically and makes
it easier to locate new stations for contact or listening pur-
poses.
FULL SCAN (p. 104)
Repeatedly scans all frequen-
cies over the entire band.
Some frequency ranges are
not scanned according to the
frequency coverage of the
transceiver’s version.
SELECTED BAND SCAN
(p. 104)
Repeatedly scans all frequen-
cies over the entire selected
band.
FREQUENCY/MEMORY
SKIP FUNCTION (p. 108)
Skips unwanted frequencies
or channels that inconve-
niently stop scanning. This
setting can be turned ON or
OFF by pushing and holding
[SKIP](5) in memory mode.
PROGRAMMED SCAN
(p. 104)
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a speci-
fied range such as repeater
output frequencies, etc.
Band
edge
xxA xxB
Band
edge
Scan edges
Scan
Jump
Band
edge
Band
edge
Scan
SKIP SKIP
Jump
PROGRAMMED LINK SCAN (pgs. 104, 123)
Repeatedly programmed scans user-programmed frequen-
cies selected at P-LINK items in the menu mode.
102
SCAN OPERATION
10
The frequency skip scan function can be turned ON or OFF
in the VFO mode. When this function is set to ON, the speci-
fied frequencies are skipped during VFO scan.
• “PSKIP” indicator appears in the VFO mode.
To Next Page
Loading...
Need help?
General
