85
8
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D GPS alarm setting
GPS alarm sounds when your own position is close the spec-
ified position. This function can be set to use information from
the received channel, a specified GPS memory channel or all
GPS memory channels.
q Enter “ALM-CH” in GPS mode.
MENU ¶ GPS ¶ ALM-CH
(Push [MENU ]), (Push [](2)/[](8), then push [ ](5).)
• Alarm setting screen is displayed.
w Push [](2) or [](8) to select “RX,” “CH,” “ALL” or “OFF.”
• “RX”, “ALL”, one of the memory channel can be selected.
• Skip next step
e
when RX, ALL or OFF is selected.
e Push [ ](5), then push [](2) or [](8) to select the de-
sired memory channel.
• Memory name or channel number appears when the channel
is selected.
r Push [ ](5) to set the alarm function and return to ALM-
CH (GPS memory) screen.
t Push
[MENU ] to return to the frequency screen.
For your information!
• When “ALL” or memory channel is selected in step w, the
alarm function depends on “ALM1” setting in GPS mode
(p. 88).
• When “RX” or “CH” is selected in step w, the alarm function
depends on “ALM2” setting in GPS mode (p. 89).
To Next Page
Loading...
Need help?
General
