Icom IC-E80D User Manual

65
7
DV MODE OPERATION
7
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
q Set the desired repeater’s frequency, offset and shift direc-
tion (pgs. 23, 32), then select the DV mode (p. 25).
Your own call sign (step w) and station call sign (step e)
can also be set as same as repeater call signs in current
call sign mode (step r).
w Set the current call sign to your own call sign.
• See pgs. 47, 48 for current call sign setting details.
e Set the current station call sign as follows:
z Push and hold [UR](.) for 1 sec. to enter UR call sign
selection mode.
x Rotate [DIAL] to select the desired station call sign.
• Push [BAND] several times to select “GRP UR” in advance.
c Push [UR](.) again to return to the frequency screen.
r Set the current repeater’s call sign as follows:
z Push and hold [CS](9) for 1 sec. to enter the current call
sign mode.
• UR call sign is displayed.
• Push and hold [CS](9) for 1 sec. to toggle the call sign and
repeater name indications.
x Push [](2) or [](8) to select “R1,” access repeater’s
call sign, then push [
](5) to enter the current call sign
selection mode.
c Push [](2) or [](8) to select the desired access re-
peater’s call sign, then push [
](5) to set the call sign
for “RPT1.”
• Return to the current call sign mode.
v Push [](2) or [](8) to select “R2,” linked repeater’s call sign,
then push [
](5) to set the current call sign selection mode.
• “RPT2” call sign screen is displayed.
b Push [](2) or [](8) to select the desired repeater call
sign in the same zone, then push [
](5).
• Return to the current call sign mode.
n Push [V/MHz] to return to the frequency screen.
t Push [PTT] to transmit; release to receive.
• UR call sign is displayed and scrolled in sequence on the fre-
quency display depending on “TX CS” setting (p. 135).
• Current call sign setting example
My call sign：
JA3YUA
Station call sign：
JG3YMK
Repeater q ： JP3YHL
Repeater r ： JP3YHJ
q w e r
UR MY
R1 R2
Area
Zone
D Calling a specific station in the same zone (Zone call)
Pushing [BAND] selects the repeater group when selection.

Icom IC-E80D Specifications

General

Brand	Icom
Model	IC-E80D
Category	Transceiver
Language	English