IDEC FT1A Series User Manual

S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378 6-7
6: HMI F UNCTION
Switching run/stop
You can run and stop the SmartAXIS with the button operations.
Running the SmartAXIS
This section describes the steps to run the SmartAXIS.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select Run and press the (OK) button.
The SmartAXIS is set to run.
Stopping the SmartAXIS
This section describes the steps to stop the SmartAXIS.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select Stop and press the (OK) button.
3. Select Yes with the (down) button and press the (OK) button.
The SmartAXIS is set to stop.
Stopped
2012/OCT/10/WED
13:30:40
Run
Edit Program
External Memory
Configurations
↓
Running
13:30:40
2012/OCT/10/WED
When setting the SmartAXIS to run by using the buttons on the SmartAXIS module, fully ensure the safety
before doing so.
Caution
Running
13:30:40
2012/OCT/10/WED
Stop
External Memory
Device Monitor
Program Monitor
Do you want to
stop PLC?
No
Yes
↓
Stopped
2012/OCT/10/WED
13:30:40

IDEC FT1A Series Specifications

General

Brand	IDEC
Model	FT1A Series
Category	Controller
Language	English