IDEC FT1A Series User Manual

6: HMI F UNCTION
6-22 S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378
Uploading/Downloading the User Program
While the SmartAXIS is stopped, you can upload the user program in the SmartAXIS to the memory cartridge. You can also
download the user program in the memory cartridge to the SmartAXIS.
Uploading the User Program (SmartAXIS to Memory Cartridge)
You can upload the user program in the SmartAXIS to the memory cartridge. This function cannot be used while the SmartAXIS is running.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select External Memory with the (up) and (down) buttons and press the (OK) button.
3. Select Memory Cartridge with the (up) and (down) buttons and press the (OK) button.
4. Select PLC -> Cartridge with the (up) and (down) buttons and press the (OK) button.
5. If the password is configured, you are prompted to enter the password.
Enter the password with the (up), (down), (left), and (right) buttons and press the (OK) button.
The confirmation screen is displayed.
6. Select Yes with the (down) button and press the (OK) button.
7. The screen below is displayed while the user program is uploaded. When the upload is finished, the screen in step 4 is displayed.
Notes:
• In either of the situations below, the password must be entered.
• The user program on the SmartAXIS has been password protected for program uploads.
• The user program on the memory cartridge has been password protected for program downloads.
• If an invalid password is entered in step 5, the screen below is displayed.
Press the (ESC) button or the (OK) button to return to step 4, and then enter the correct password in step 5.
Stopped
2012/OCT/10/WED
13:30:40
Run
Edit Program
External Memory
Configurations
Memory Cartridge
SD Card
PLC -
>
Cartridge
Cartridge -
>
PLC
Password:
***A
Entering the password is required for the following cases:
- The user program in the SmartAXIS is password-protected against the user program upload.
- The user program in the memory cartridge is password-protected against the user program download.
Do you want to clear
program in cartridge?
No
Yes
Password is incorrect.

IDEC FT1A Series Specifications

General

Brand	IDEC
Model	FT1A Series
Category	Controller
Language	English