IDEC FT1A Series User Manual

S MART AXIS P RO /L ITE U SER ' S M ANUAL FT9Y-B1378 6-25
6: HMI F UNCTION
Maintaining the SD Memory Card
Access to the memory card inserted into the SmartAXIS can be stopped while the SmartAXIS is running or stopped. The memory
card inserted into the SmartAXIS can also be formatted while the SmartAXIS is stopped. The memory card cannot be formatted
while the SmartAXIS is running.
Stopping Access to the SD Memory Card
This section describes how to stop the access to the SD memory card with the button operations on the SmartAXIS.
1. On the standard screen, press the (ESC) + (OK) buttons.
The system menu is displayed.
2. Select External Memory with the (up) and (down) buttons and press the (OK) button.
3. Select SD Card with the (up) and (down) buttons and press the (OK) button.
4. Select Stop Access with the (up) and (down) buttons and press the (OK) button.
5. Select Yes with the (down) button and press the (OK) button.
6. While the access to the SD memory card is being stopped, the screen below is displayed. When stopping the access is finished,
the screen in step 4 is displayed.
Notes:
• Set the write-protect switch on the SD memory card to insert into the SmartAXIS module to the off position.
• Insert and remove the SD memory card in the direction indicated on the SmartAXIS.
• Do not remove the SD memory card while the access to it is being stopped. There is a risk of damage to the SD memory card and the data
stored on it. Check that the SD memory card access LED is off before removing the SD memory card from the SmartAXIS.
Running
13:30:40
2012/OCT/10/WED
Run
Edit Program
External Memory
Configurations
Stop
External Memory
Device Monitor
Program Monitor
When the SmartAXIS is stopped
When the SmartAXIS is running
Memory Cartridge
SD Card
Stop Access
Format
Do you want to stop
SD card access?
No
Yes

IDEC FT1A Series Specifications

General

Brand	IDEC
Model	FT1A Series
Category	Controller
Language	English