CHAPTER 4:BATTERY ALARM AND DISPLAY
•
Airplane
BUTTON USE
MODE Used to move up through the available functions
CHANNEL Used to select the desired channel
INCREASE Used to increase the value of the selected function
DECREASE Used to decrease the value of the selected function
CHAPTER 3:KEY INPUT AND DISPLAY
•
Airplane
KEY INPUT AND DISPLAY3
When the transmitter battery drops below 9.0 volts,
the display will start to flash BAT and an audible alarm
will sound for 8 beeps. These warnings mean you
should land your aircraft immediately.
Note: During the period that the battery alarm is
flashing, the input buttons will not function. If you are
currently in the function mode, the transmitter will exit
automatically and return to the normal display
(see Section 5.1).
BATTERY ALARM AND DISPLAY4
MODE
ENTER
CHANNEL
To enter the function mode press the
MODE and CHANNEL buttons
simultaneously while the transmitter is on.
Press the INCREASE and DECREASE
buttons simultaneously to clear the
screen or return to factory preset.
To enter the system mode press the
MODE and CHANNEL buttons
simulataneously and hold while
turning on the transmitter.
INCREASE
CLEAR
+–
DECREASE
19
XP652 MANUAL Airplane
V
To Next Page
Loading...
Need help?
General
