JR XP652 User Manual

–
+
MODE
ENTER
CHANNEL INCREASE
CLEAR
DECREASE
Press the INCREASE and
DECREASE buttons simultaneously
to reset the data (a beep will sound).
Press the MODE button
until RST appears on
the screen.
AC
RST
INDICATES DATA RESET FUNCTION
MODEL TYPE TO RESET
Accessing the Data Reset Function
CHAPTER 6:FUNCTIONS
•
Airplane continued
The data reset function allows you to reset all the
programming in the selected model (1-5) to the
factory settings. Before using the data reset
function it is important to enter the model
selection function and check that the current model
number (1-5) indicated is the model that you want to
reprogram to the factory settings. The model selection
function is described in Section 6.5.
1. Press the MODE and CHANNEL buttons
simultaneously and hold.
2. Turn on the transmitter to enter the
system mode.
3. Press the MODE button until RST appears on the
screen.
4. Press the INCREASE and DECREASE buttons
simultaneously to reset the data. (To confirm that
the selected model's programming has been reset,
a beep will sound and the AC or HE will
momentarily disappear from the screen.)
5. Press the MODE button to access the dual rate
switch selection function.
6. To exit, press the MODE and CHANNEL buttons
simultaneously.
DATA RESET
•
System Mode
6.2
23
XP652 MANUAL Airplane

JR XP652 Specifications

General

Brand	JR
Model	XP652
Category	Remote Control
Language	English