22
XP652 MANUAL Airplane
Two types of aircraft programming are available
with the XP652, airplane (AC) and helicopter (HE).
When you enter the model type selection function,
the current model type will appear on the screen.
(The current model type being the factory preset or the
last model used.) When you press the increase or
decrease button to change the model type, the new
model type indicated on the screen will flash. For
example, if the current model type is AC and you
change to HE, HE will flash on the screen. The flashing
alerts you to the change of model type and will stop
once you move to the next function or exit the system
mode.
1. Press the MODE and CHANNEL buttons
simultaneously and hold.
2. Turn on the transmitter to enter the system mode.
3. Press the MODE button until TYP appears on the
screen.
4. Press the INCREASE or DECREASE button until
the desired model type appears on the screen
(AC = airplane HE = helicopter).
5. Press the MODE button to access the data reset
function.
6. To exit, press the MODE and CHANNEL buttons
simultaneously.
Accessing the Model Type Selection Function
MODEL TYPE SELECTION
•
System Mode
CHAPTER 6:FUNCTIONS
•
Airplane (System Mode)
6.1
appears on the screen.
the screen.
To Next Page
Loading...
Need help?
General
