FX-1/FX-1R Maintenance Manual
16-1
[16] FX-1 JIG LISTS
Part No. Part name Purpose Figure Remarks
E2101998000 Jig nozzle A Laser offset
Common for
KE2010/20/30/40
E3622721000 CAL piece A Head offset
Common for
KE2010/20/30/40 and
KE730/740/750/760
E2106998000 Camera
adjustment jig
OCC camera offset
Common for
KE2010/20/30/40 and
KE700 series
E2107998000 Ceramic board
(2 inch)
Adjustment of OCC camera
illumination
Common for
KE2010/20/30/40
40008108 ATC offset boss,
6 sets
ATC offset (assembly position)
For component height
6 mm
40016860 ATC HT BOSS
NM6080001SC NUT
ATC offset (assembly height)
Part No.: 40016862
Part name: ATC HT
BOSS SET (Assembly
part No. for ATC HT
BOSS & NUT)
40001346 Nozzle assembly
508
Laser offset
Head offset
ATC offset, etc.
E62607050A0A Master feeder
assembly
Pickup reference position offset
Same part as that used
for TF pick position
adjustment
PH0400122C0 Parallel pin (8
pcs.)
Magnescale sticking
Standard jig
L191E021000 Glass scale Mapping correction
40024457 Hook pin For tension adjustment
40027832 ADJ shim 0.3 For adjustment of magnescale
gap
0.3-mm thick gauge
can be used. (This
gauge must be
demagnetized
completely.)
Rev. 2.00
To Next Page
Loading...
Need help?
General
