KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
1-24
1-8-3. Assembling the Cable
(1) Grease the portion of the cable
bearer to hold the 40002233 and
40002234 cables and place the
cables in the X-axis cable bearer as
shown in the figure below (a figure
viewed from A).
Rev. 2.00
Figure 1-8-3-1
Check the connector orientation and take care so that the air tubes do not become warped.
Viewed from A
(Figure 1-8-3-2)
FC RUBBER
AIR TUBE
Front side
CABLE BEARER
Viewed from A
Figure 1-8-3-2
(2) Attach the plastic rail bracket A.
Plastic rail bracket A
Figure 1-8-3-3
To Next Page
Loading...
Need help?
General
