KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
3-6
3-3-3. Sticking the Label
After the label sticking surface has been degreased, stick the label.
Figure 3-3-3 Replacing the Amplifier
(Left: label/right: label stuck)
3-3-4. Mounting the Board
To mount the height sensor board 2 assembly, insert the connector into the head main board
completely and press the HMS PWB support from the top to secure it.
HMS PCB su
ort
Round head
screw (× 4)
Head main board
assembly
HMS board 2 assembl
Figure 3-3-4 Mounting the Board
Rev. 2.00
To Next Page
Loading...
Need help?
General
