KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
1-23
1-8-2. Placing a Mark on the Cable (X)
(1) Place marks on the 40002233 and 40002234 (40002347) cables.
40002233 cables
CN218
945＋5－0 (750)
Placing marks side by side Placing marks on the side of the cables
Figure 1-8-2-1
40002234 (40002347) cables
CN801
945+5-0 (500)
Placing marks on the side of the cables
Figure 1-8-2-2
c Place a white mark at a position (on the side) 750mm from the end of CN218 of the 40002233
cables.
d Place white marks at a position (on the side and the horizontal direction) 945+5-0mm from
the position marked in Step c.
e Place a white mark at a position (on the side) 500mm from the end of CN801 of the 40002234
cables.
f
On an E-size machine, the part numbers of the following cables are as follows:
Place a white mark at a position (on the side) 945+5-0mm from the position marked in Step
e.
40002232 (Y BEAR CABLES ASM)
→ 40002346 (Y BEAR CABLES ASM (E))
40002234 (XY BEAR HEAD CABLES ASM)
→ 40002347 (XY BEAR HEAD CABLES ASM
(E))
This applies to the following pages.
Rev. 2.00
To Next Page
Loading...
Need help?
General
