JUKI KE-2050 User Manual

KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
1-26
1-8-4. Separating the Fusion-bonded Parts of the Cables
(1) Separate the fusion-bonded parts of the cables with a cutter so that the 40002233 and 40002234
cables can be bent to the Y-axis bear cables at an angle of 90 degrees.
Incise with a cutter. At this time, take care so that the sheath is not damaged.
Figure 1-8-4-1
Cables separated by a cutter
Figure 1-8-4-2
Rev. 2.00

JUKI KE-2050 Specifications

General

Brand	JUKI
Model	KE-2050
Category	Industrial Equipment
Language	English