Juniper CTP2000 Series Hardware Documentation

4. Identify the release mechanism for the SFP.
Different SFPs use different release mechanisms. See Figure 38 on page 97 for possible
release mechanisms, which include:
•
A button that you press inward
•
A ring that you press inward
•
A bar that you pull sideways, then outward
•
A tab that you pull sideways, then outward
Figure 38: Possible Release Mechanisms on the SFP
5. Release the SFP and pull it out of the slot.
6. Place the SFP into an antistatic bag.
Related
Documentation
• Installing SFPs in a CTP2000 Module on page 95
97Copyright © 2017, Juniper Networks, Inc.
Chapter 13: Installing and Removing SFPs in a CTP Module

Juniper CTP2000 Series Specifications

General

Brand	Juniper
Model	CTP2000 Series
Category	Network Hardware
Language	English