Juniper CTP2000 Series Hardware Documentation

Figure 6: CTP2024 Platform Containing the PP332 Processor (AC Version,
Rear View)
Figure 7: CTP2024 Platform Containing the PP332 Processor (DC Version,
Rear View)
Power A and power B input connectors
Ground terminal
Fuse
ETH1 USBConsole
COM2 COM3PMC I/O 2
Not used
Not used
Interface module, slot 1
Interface module, slot 2
g015358
Not used
ETH0
PMC I/O 1
Related
Documentation
CTP2008 Platform on page 4•
• CTP2056 Platform on page 7
CTP2056 Platform
The Juniper Networks CTP2056 Circuit to Packet platform can have up to seven removable
interface modules and one removable processor module, and is available in both
AC-powered and DC-powered versions. It has a removable fan tray, and airflow is
side-to-side. Figure 8 on page 8, Figure 9 on page 9, and Figure 10 on page 10 show
the CTP2056 chassis containing the PP332 processor (which requires an RTM card for
Ethernet and console port accesses). The new PP833 processor module does not require
an RTM card. All PP833 module access is located on the front panel with all CTP serial
and T1/E1 ports. If you are upgrading from the old PP310 or PP332 processor to the PP833
processor, the RTM card may be left in the node. But, none of the interfaces (Ethernet
or serial ports) on the RTM panel are functional.
7Copyright © 2017, Juniper Networks, Inc.
Chapter 1: CTP2000 Series Platform Overview

Juniper CTP2000 Series Specifications

General

Brand	Juniper
Model	CTP2000 Series
Category	Network Hardware
Language	English