43
© 2019 Konami Gaming Inc.P/N 810497 KXP Setup Manual
KMS
SETUP
caSH device SetuP
1. From the SETUP menu, press CASH DEVICE SETUP to enter the CASH DEVICE SETUP screen. The
following screen is displayed.
2. The following table describes the functions for each item in the CASH DEVICE SETUP screen.
CASH DEVICE SETUP
ITEM DESCRIPTION
BILL VALIDATOR
None: No Bill Validator is used.
JCM-WBA: Bill Validator is used.
MARS: Bill Validator is used.
$1, $5, $10, $20, $50,
$100
Disable: When the Stacker is full, no tilt will occur.
Enable: When the Stacker is full, a tilt will occur.
TILT IF THE STACKER IS
FULL
Disable: The Bill Validator will not accept the domination.
Enable: The Bill Validator will accept the domination.
PRINTER
None: No printer is used.
ITHACA: ITHACA printer is used.
SEIKO: SEIKO printer is used.
TICKET OUT SOUND
Disable: No ticket out sound is played.
Enable: Ticket out sound is played.
SHOW PAPER LOW
CANDLE
Disable: Paper Low Candle is not used.
Enable: When the amount of the paper becomes low, the Paper Low Candle lights up.
DEMO BARCODE SCAN-
NABLE
Disable: The demonstration barcode ticket is not scannable.
Enable: The demonstration barcode ticket is scannable.
NON-CASHABLE PRINT
TITLE
Allows the operator to determine the non-cashable ticket print title.
DEBIT PRINT TITLE Allows the operator to determine the debit ticket print title.
DEMO PRINT TITLE Allows the operator to determine the demonstration ticket print title.
COIN ACCEPTER
Not Use: No Coin Accepter is used.
Use: Coin Accepter is used.
COIN HOPPER
Not Use: No Hopper is used.
Use: Hopper is used.
CASH DEVICE SETUP
To Next Page
Loading...
Need help?
General
