To Next Page

To Previous Page

KMS

SETUP

SaS PRotocol SetuP

1. Press SAS PROTOCOL SETUP to enter the SAS PROTOCOL SETUP screen. The following screen is

displayed.

The G2S conguration option on this screen, if shown, is only available for Engineering and Development use.

2. Check or uncheck an option to select it.

3. The following table describes the functions for each item in the SAS PROTOCOL SETUP screen.

SAS PROTOCOL SETUP

ITEM DESCRIPTION

REMOTE HANDPAY RESET Enable/Disable accepting remote handpay reset commands from the SAS host.

HANDPAY QUEUE Enable/Disable re-issuing handpay pending messages. Uncheck to support legacy handpay reporting.

HANDPAY REPORTING

Disabled: Partial pay amounts are included in SAS LP 1B.

Enabled: Partial pay amounts are not reported in SAS LP 1B.

LP21 Fast CRC Enable fast CRC generation for response to Long Poll 21.

EXTENDED GAME N INFO Enable Long Poll B5 extensions for reporting Paytable name and available denoms.

METER COLLECTION

CH1

CH2

CH3

Enable meter collection on channel 1.

Enable meter collection on channel 2.

Enable meter collection on channel 3.

4. Press EXIT to return to the COMMUNICATIONS SETUP menu.

COMMUNICATIONS SETUP

SAS PROTOCOL SETUP

Konami KXP User Manual

Questions and Answers: