7
bizhub 350/250 7-3
7 Transmission applications
7.1 FAX Menu
If you send a fax with an application function, open the FAX Menu screen,
and and set the functions you want to use.
Displaying the fax menu screen
1 Press [Fax/Scan] on the control panel to open the fax screen.
2 Press [FAX Menu].
3 Press the tab for the function that you wish to use.
4 Press the key for the function you
want to use.
5 Conduct either of the following oper-
ations.
– When the dedicated screen is
displayed, press [Enter].
– If another screen appears so a
setting can be selected for the
function, select the setting, and then press [Enter].
– To cancel the function, press [OFF].
– Press [Cancel] to return to the original communication setting.
The fax screen will be restored.
!
Detail
Press the key for the function you want to set to open the screen in which
you can set the function.
You can combine more than one function; however, you cannot select
functions that are not compatible with a function previously selected.
Those functions appear dimmed on the control panel.
To Next Page
Loading...
Need help?
General
