1
bizhub 350/250 1-19
1.6 Descriptions and symbols of documents and paper
The use of words and symbols in this manual are explained below.
“Width” and “Length”
Whenever paper dimensions are men-
tioned in this manual, the first value always
refers to the width of the paper (shown as
“Y” in the illustration) and the second to the
length (shown as “X”).
Paper orientation
If the width (Y) of the paper is shorter than
the length (X), the paper has a vertical or
portrait orientation, indicated by w.
If the width (Y) of the paper is longer than
the length (X), the paper has a horizontal or
landscape orientation, indicated by v.
To Next Page
Loading...
Need help?
General
