11
bizhub 350/250 11-15
Tone volume parameters
In the User Management screen, sound levels can be specified using the
“Line Monitor Sound” and the “Job Complete Beep” parameters.
Memory RX ON/OFF
Parameter Description Default Setting
Line Monitor
Sound
Specify the volume (between 0 and 5) of the sound
produced when a transmission is being monitored.
3
Job Complete
Beep
Specify the volume (between 0 and 5) of the tone pro-
duced when a job is completed.
3
Parameter Description
Memory RX ON/
OFF
You can enable or disable unconditional memory reception, which means
to receive documents and store in memory so that you can print them lat-
er.
To Next Page
Loading...
Need help?
General
