3
bizhub 350/250 3-17
Confirming settings and communication results
The settings and communication results of the fax screen and fax application
screen can be confirmed by using Check Job Details on the control panel.
1 Press [Fax/Scan] on the control panel.
2 Press [Mode Check] on the control panel.
3 Press a key of setting you want to
confirm.
4 Press [Enter] to confirm the settings.
Dest. tab
Up to four selected destinations can be
viewed in each screen. If more than four
destinations have been selected, press [ ]
and [ ] to display a different screen. Des-
tinations can be deleted or added.
:
Indicates that the recipient was selected using the one-touch dial buttons.
:
Indicates that the fax number was directly typed in.
[Delete]: Press this button to delete the selected recipient.
[Detail]: Press this button to check the transmission mode of the selected re-
cipient.
[Next Destination]: Press this button to add a recipient.
!
Detail
For details on adding a recipient, refer to “Selecting one destination” on
page 3-19.
To Next Page
Loading...
Need help?
General
