11
bizhub 350/250 11-71
Specifying settings for general subscriber lines (mode 006)
Specify the setting for silent F net reception (port 1) and the calling method
on the general subscriber line.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
(*) Available when optional fax multi line is used.
Bits 7 6 5 4 3 2 1 0
Setting 0 0 1 1 0 0 1 0 (HEX: 32)
Bit Description Setting Description Page Refer-
ence
7, 6, 5, 4, 3,
2
-----------------------
001100 *Do not change these
bits.
----------
1 Specifies the calling
method for the gen-
eral subscriber line.
(*)
0 Calls from the specified
line (port 1 or 2), based on
the operation and regis-
tration settings.
p. 11-32
1 Calls from the available
line (port 1 or 2), regard-
less of the operation and
registration settings.
0 -----------------------
0 *Do not change this bit. ----------
To Next Page
Loading...
Need help?
General
